Battery chargers
Phoenix Smart IP43 12/50 (3) 230V Victron Energy adaptive charger
Manufacturer: VICTRON ENERGY
INDEX: PSC125053085
With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.
Automatic voltage compensation
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
Less maintenance and aging when the battery is not in use: the Storage Mode
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
VE.Direct interface
For a wired data connection to a Color Control panel, PC or other devices.
Battery technology: | Klasyczny, AGM, Gel, Litowo-jonowy |
---|---|
Communication type: | VE.Direct, Bluetooth |
Weight [kg]: | 3.7 |
Dimensions [mm]: | 180.0 x 249.0 x 100.0 |
Charge voltage, absorption [V]: | 14.4 / 14.7 / 14.2 |
---|---|
Charge voltage, storage [V]: | 13.2 / 13.2 / 13.5 |
Nominal battery voltage [V]: | 12 |
Rated charge current [A]: | 50 |